News

Why forging is an important branch of plastic processing？

2024

08-26

What are the general methods for preventing rust on the surface of forgings?

2021

07-14

What is the process of processing forgings?

2021

07-14

How to protect the appearance of forgings?

Forging refers to a workpiece or blank obtained by forging and deforming a metal blank. By applying pressure to the metal blank, it produces plastic deformation, which can change its mechanical properties. According to the temperature of the blank during processing, forgings can be divided into cold forging and warm forging and hot forging. Cold forging is generally processed at room temperature, and hot forging is processed at a temperature higher than the recrystallization temperature of the metal blank.

2024

07-29

The curtain of carbon emission reduction has been opened, how should the steel industry develop?

"Green water and green mountains are golden mountains and silver mountains." There is no irreconcilable contradiction between industrial development and the ecological environment. At present, the global spread of the new crown pneumonia epidemic has triggered a profound reflection on the relationship between man and nature. The global response to climate change requires greater action. China, which is turning to high-quality development, has once again stood up. China will increase its national independent contribution, adopt more powerful policies and measures, strive to reach the peak of carbon dioxide emissions by 2030, and strive to achieve "carbon neutrality" by 2060. , Reflects the actions and responsibilities of a responsible major country.

2024

07-29

What are the points to pay attention to during the forging process?

Forgings for Pressure Vessels The main processing method of mechanical parts blanks is forging. Through forging, the specific shape of the parts can be obtained, and the internal structure of the metal product can even be improved. Forging technology is generally used in the production and processing of products with high bearing capacity and relatively high requirements. It can improve the mechanical and physical properties of the product. The future development of forging manufacturers is definitely related to quality. If you want to find an excellent forging manufacturer, this is also fundamental. Good quality forgings and a good service attitude are very

2024

07-29

What are the specifications when forging forgings?

The key to formulating cooling specifications for hot forging steel  is cooling rate. The appropriate cooling rate should be determined according to the chemical composition of the forging material, the characteristics of the structure, the cross-sectional size of the forging, and the forging deformation. Generally speaking, forgings with a low degree of alloying, a small cross-section and a simpler shape can allow a fast cooling rate and can be cooled in air after forging; otherwise, they must be cooled slowly (ash cooling or furnace cooling) or separated Stage cooling.

2024

07-29

What are the precautions during austempering?

The concept of austempering Austempering refers to the process of isothermalizing the quenched parts above the Ms point temperature and the temperature region above the "nose" of the C curve for a period of time to fully transform austenite into lower bainite, and then take out air-cooled heat treatment. It can be seen that austempering is carried out within a certain temperature range, so the structural stress and thermal stress are relatively small. Austempering is usually used for workpieces with complex shapes and strict requirements for deformation.

2024

07-29

How to improve the overall production efficiency of the forging factory?

In recent years, with the increasing complexity of forging products in the forging market, the advantage of forging processing efficiency of forging plants has now become one of the decisive factors for forging plants to strive for the market advantage of forging products. Therefore, how to improve the forging processing efficiency of forgings is important for forging plants. The advantage in the market competition plays a key role, and it is a transformation problem faced by many forging manufacturers.

2024

07-29

What are the differences and advantages of hot-rolled steel and cold-rolled steel?

Both hot rolling and cold rolling are processes for forming steel plates or profiles, and they have a great influence on the structure and properties of steel. The rolling of steel is mainly hot rolling, and cold rolling is usually only used for the production of small-sized steel and sheet steel with precision dimensions.

2024

07-29

< 12345 > proceed page

Zhejiang Sanmen Taihe Heavy Forging Co., Ltd. is professional China Plastic Die Steel factory and wholesale Plastic Mould Steel manufacturers, welcome to make any information consultation,Quick response and rapid delivery,Diversified products and quality assurance,Accept customization and meet your requirement

Industry Park of Shangkeng, Haiyou Town, Sanmen County, Taizhou City, Zhejiang Province, China.

+86-576-83351788
+86-576-83233978
+86-576-83351868 

taihe@thforging.com 

COMPANY

> Company 
> Factory 

> FAQ

> Mobile version

图片名称

PRODUCTS

> Plastic Die Steel
> Hot Working Die Steel 
> Forged Shape
> TS SERIES 
 

NEWS

Copyright © 2024 EWIDE MACHINERY CO.,LTD   Powered by:www.300.cn  seo

Business license

这里是占位文字